One of the most trusted and leading names in the Firefighting Products industry of the Middle East and GCC region is Dutch Pennant LAC. We have been supplying the best in class products and solutions against fire since the last four decades. We believe that protecting people and property from fire is a social commitment with a purpose that transcends the bottom line. We always invest our deepest attention and determination to bring out the most advanced and efficient fire safety and firefighting solutions to protect lives and properties. With our unmatched quality and dedicated service, we have been winning the hearts of thousands of customers.
Breaching inlets are installed outside the building or any easily accessible area in the building for fire brigade personnel to access the inlet. This inlet is used by the fire brigade personnel to access water. It is normally dry but is used to pump water by charging using fire fighting equipment. Breaching inlets are used in buildings for firefighting purposes, fitted with inlet connection at Civil De fence access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances. The 2-way breaching inlets has 2 x 2½” Instantaneous male non-return valve inlets and a 4″ outlet. The 4-way inlet breaching has 4 x 2½” Instantaneous male non-return valve inlets and a 6 outlet along with 1″ drain valve.
Breaching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances. The breaching inlets are manufactured with care to comply with safety standards comprising of male instantaneous connections, drain valves, and non-return valves. The breaching inlets and its fittings are suitable for a normal working pressure of 10 bar.
Features :
Body material made of spheroidal graphite cast iron (Ductile Iron)
Inlet connection and non-return valves material made of copper alloy.
Each inlet connection is fitted with non-return valve and of spring-loaded mushroom type.
Each breaching inlet is painted RED internally and externally.
Compact and elegant design with excellent flow characteristics.
High-quality casting finishes.
Corrosion-resistant and quality materials used for durability, long-life, and efficiency.
Maintenance-free.The materials used in the manufacture of the breaching inlets are in conformity to the standard’s requirement. The body is cast from spheroidal graphite iron and the inlets are made of gunmetal and copper alloy parts with bronze spring, stainless steel lock nut, washer, etc. The internal part of the breaching inlet bodies is coated with “black” epoxy cold tar paint which is a good anti-corrosion protection. The inlet blank caps are rubber with chrome chain. Brass or gunmetal blank caps are also available upon request.
Breaching inlet valve is installed at ground level to provide a connection to the outsource water supply. The system is usually dry and charged by the fire brigade in an emergency cases. The materials used in the manufacture of the breaching inlets are in conformity to the standard’s requirement. The body is castes from spheroidal graphite iron and the inlets are made of gunmetal and copper alloy parts with bronze spring, stainless steel lockout, washer, etc.PCB certified.
Breaching inlets are installed outside the building or any easily accessible area in the building for fire brigade personnel to access the inlet. This inlet is used by the fire brigade personnel to access water. It is normally dry but is used to pump water by charging using fire fighting equipment. The 2-way breaching inlets has 2 x 2½” Instantaneous male non-return valve inlets and a 4? outlet. The 4-way inlet breaching has 4 x 2½” Instantaneous male non-return valve inlets and a 6 outlet along with 1? drain valve.
All breaching inlets provided by NAFF CO are PCB certified and are suitable for installation in buildings with fire fighting dry risers. NAFF CO is the leading manufacturer and supplier of breaching inlets in Dubai and the Middle East. Our breaching inlets will allow your fire fighters to respond quickly to fires.
2-Ways & 4-Ways Breaching Inlets are provided at the Dry or Wet Riser Mains of 4″(100mm) or 6″(150mm) fitted at ground level to provide easy access for the connection to water supply. In conjunction with the Fire Protection System, the Fire Brigade is able to charge-up the System via the Breaching Inlets during emergencies.
2-Ways & 4-Ways Breaching Inlets are provided at the Dry or Wet Riser Mains of 4″(100mm) or 6″(150mm) fitted at ground level to provide easy access for the connection to water supply. In conjunction with the Fire Protection System, the Fire Brigade is able to charge-up the System via the Breaching Inlets during emergencies.
An Inlet breaching valve is installed at ground level to provide a connection to the water supply. The system is usually dry and charged by the fire brigade in an emergency. DRV009 has 4 inlets which are 2 ½” male instantaneous connections to BS336 and fitted with non-return valves, a 1” drain valve, caps and chains. 4 way inlet breaching valves can be installed in the vertical or horizontal position