Smoke detector price in Pakistan,
Smoke detector price in Pakistan. The smoke detector detects the smoke to make sure everyone is preventing and alerted in case of a fire emergency and unwanted conditions.
The detector is suitable for detecting and preventing the smoke in the room, home, garage, shop, hotel, restaurant, office, school, bank, library, computer house, storehouse and etc.
it is very easy to install Easy to install and convenient to use in case of if you don’t install it Universal Fire Protection ready to serve you best service with professional and trained A photoelectric sensor for early detection from all directions.
How to get Smoke detector Price in Pakistan?
Universal Fire Protection is best to provide Fire Fighting Equipment like Fire alarm system, Fire Extinguisher, Fire Ball, Fire Extinguisher and Smoke Detector in Pakistan. Lahore Karachi Islamabad and Rawalpindi. UFP is main leading and professional over 30-years experience in the firefighting field. In order to know the price of smoke detector in Pakistan or Lahore or Karachi you need to put a little effort in form of our nearest office or make a call at
Introduction:
The detectors are photo-electronic detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Two LEDs on each detector provide local 360° visible alarm indication. They flash every six seconds indicating that power is applied and the detector is working properly. The LEDs latch on in alarm. LEDs will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alarm can be reset only by a momentary power interruption.
The detector that initiated the alarm condition will have its red LED and relays latched until reset by panel.
Heat detector and smoke & heat detector combine a photo electronic sensing chamber and a temperature heat detector.
| Operating Voltage Range | 9 to 28 VDC Volts Non-polarized |
| Standby Current | ≤120μA@24VDC |
| Maximum Alarm Current (LED on) | ≤15mA@24VDC (1K Ohm current-limiting resistance) |
| Operating Humidity Range | ≤95%RH(40°C±2°C) Relative Humidity, Non-condensing |
| Operating Temperature Range | -10°C to 50°C (14°F to 122°F) |
| Smoke Alarm Sensitivity | 1.06±.26%FT |
| Height | 48.2 mm installed in Base |